Farm equipment runs in hot, dusty, dirty conditions that are many times wet too!  Extra protection is always needed to prevent heat, wear, corrosion, rust, leaks and water intrusion.  Power Punch makes products to protect expensive, valuable equipment and keep it working.

Engines in farm equipment run hard and long under the harshest conditions imaginable.  Full protection is provided with Power Punch Oil Supplements at 10% to 15% in diesels and 20% to 25% in gasoline engines.

Hydraulic systems are a source of constant maintenance.  Power Punch Oil Supplement used at 10% by volume will significantly reduce heat, leaks and pump wear.  Power rams will be coated for rust and pits.  Seals will last longer and less time will be spent on repairs to keep equipment working when it is needed.

Equipment frame and chassis and joints need high strength lubrication that will survive the conditions.  Power Punch Waterproof Multipurpose grease has the highest Timken load available and is truly waterproof and tacky to stay where it is needed.  In many cases, Power Punch Grease will stay in place so well that frequent greasing is not necessary and money will be saved on using less grease.

Gear boxes tend to be lower speed and higher load than most industrial applications and a treat rate for Oil Supplement can be as high as 100% in low speed, high load boxes such as in irrigation equipment.  If the gear box foams because of high speed, a better mix is 50% EP Gear Oil Additive in Gear Oil.